Global Explosion Proof Lighting Market by Type (Spot, Linear, Small Portable Type, Specialty, Panel and Miscellaneous, and Others); By Light Type (Fluorescent, Incandescent, HID, LED, and Others); By Certifications (IEC, ATEX, NEC/CEC, and Others); By Standard (Class, and Division); By Zone (1, 2, and 2); By End-User Industry (Power Plants, Pump Stations, Substations, Military Bases, Airports, Gas Stations, Oil Fields, Oil Platforms, Marine/Shipyard, and Others); Global Explosion Proof Lighting Industry Analysis, Size, Share, Growth, Trends, and Forecasts 2019-2025

Check Today's Best Price

$3500 Buy Now
Explosion Proof Lighting market will reach a volume of 2,405 thousand units by 2025 with a CAGR of 7.4% from 2019 to 2025.
  • Global Explosion Proof Lighting Market: Overview

    Explosion Proof Lighting market will reach a volume of 2,405 thousand units by 2025 with a CAGR of 7.4% from 2019 to 2025.

    Explosion Proof lights, also known as Hazard Location Lighting and Intrinsically Safe Lights refers to lighting fixtures that are able to contain sparks that could potentially ignite the flammable and explosive gases in the atmosphere. Therefore, explosion-proof lighting does not refer to lighting equipment that is resistant to explosions but rather, the capacity to prevent external explosions from occurring in a hazardous location. This factor significantly minimizes the risk of the explosive reaction from expanding or igniting volatile substances in the area, during an explosion.

    High risk or hazardous area is where fire or explosion threats may exist due to flammable gases or explosive substances such as vapors, mists, or dust. Typical examples of hazardous environments are drilling platforms, refineries, chemical and power-generation facilities, and mines. In these locations, it is required to assure safety against the occurrence of arcs, sparks, excessive temperature, overheating caused by motors and electrical equipment in operation. However, explosive atmospheres are not only observed in mines or chemical and petroleum industries: the use of gases, fluids or solvents at temperatures close to their vaporization temperature can make each factory or plant explosive.

    Global Explosion Proof Lighting Market: Growth Factors

    The intricate and hazardous nature of confined spaces presents several risks for workers. Because of this, many businesses that operate in hazardous locations make use of explosion-proof lights to prevent the ignition of flammable gases and dust particles. Increase in infrastructural developments among various end-user industries for the workers and labors safety is a primary global explosion proof lighting market trend. According to the International Labour Organization, the Encyclopedia of Occupational Health & safety suggest that the explosion or fire involving a confined atmosphere causes about half of the fatal welding and cutting accidents in the United States every year. For that, the North American region has launched an official approval quality certification UL-844. Under UL-844 regulations, different hazardous locations are defined by Class and Division systems like Class I Division 1 or Class I Division 2, Class II Division 1 or Class II Division 2, in accordance with the National Electrical Code, NFPA 70. However, the EU region’s official certification for product approval includes ATEX or IECEx for the quality test of explosion-proof lighting infrastructure. Such certifications for quality assurance of the product restores confidence in the labors encouraging company owners to install explosion-proof lighting in their workspaces. However, lack of standardization and high import duties may hinder the market from growing.

    Moreover, strong government regulatory standards from countries like US, UK, and China has propelled the market to grow further with profitable opportunities. For instance, China’s Infrastructures of enterprises, such as workshops and warehouses, production equipments, production technology, and safety facilities which are anti-fire, explosion-proof, lightning protection and anti-static should conform to stipulations of national standards and industrial standards ,such as Safety code for design of engineering of fireworks and firecrackerand Technical regulations for the working safety of fireworks and firecrackers.

    Global Explosion Proof Lighting Market: Segmentation

    Type, light type, certifications, American standard, zone, end-user industry, and geography are the segments identified under the global explosion proof lighting market. The type segment is sub-segmented based on the spot, linear, small portable-type, specialty, panel and miscellaneous, and other types.

    Fluorescent, Incandescent, HID, LED, and Others are the bifurcation of the light type segment. Among all the light types, LED’s are the most used lights in explosion-proof lighting. LED technology has donated to the features of explosion proof lights by making them more reliable, robust and cost-effective. Thus, manufacturing firms are focused to develop such solutions and also imply and integrate the LED technology in their products to amplify their quality and standards.

    By certifications, the segmentation can be given as IEC, ATEX, NEC/CEC, and other certifications. On the basis of the American standard, the categorization can be given as the class and division. The zone segment can be further sub-segmented into 0, 1, and 2. Based on industry vertical segment, the verticals can be sub-divided into power plants, substations, pump stations, military bases, gas stations, airports, oil fields, oil platforms, marine/shipyard, and other end-user industries.

    Global Explosion Proof Lighting Market: Regional Analysis

    Based on geography, the global explosion proof lighting market is divided into North America, Europe, Asia-Pacific, South America, and Middle East & Africa. North America is further divided in the U.S., Canada, and Mexico, whereas Europe consists of the UK, Germany, France, Italy, and Rest of Europe. Asia-Pacific is segmented into India, China, Japan, South Korea, and Rest of Asia-Pacific. The South America region includes Brazil, Argentina, and the Rest of South America, while the Middle East & Africa is categorized into GCC Countries, Egypt, South Africa, and Rest of Middle East & Africa.

    Global Explosion Proof Lighting Market: Competitive Players

    The report presents a detailed analysis of major players operating in the explosion-proof lighting market. Few of the include Philips Lighting Holding, GE Lighting, Hatch Transformers, Chalmit Lighting UK, Osram Sylvania, Heraeus Holding, Victor Lighting, R. Stahl, and WorkSIte Lighting, among others.

    Prominent players are adopting product launch, partnerships/collaborations, agreements, investments, and acquisitions as their marketing strategies to sustain in the intense competition and improve their product portfolio. For instance, on March 14, 2019, Heraeus developed the first antistatic coating that protects lighting units in electrostatic discharged and explosion-proof areas. Based on the conductive polymer Clevios, HeraeusEpurio and Plast Composite Consulting (PCC) designed this coating for lighting-unit covers in electrostatic discharge (ESD) and explosion-proof areas.

    Explosion Proof Lighting Market Key Segments:

    By Type

    • Spot
      • Flood
      • General
    • Linear
      • Tube
      • Sting/Strip
    • Small Portable Type
      • Flash Lights
      • Wearable Headlamp
    • Specialty, Panel, and Miscellaneous
    • Other Types

    By Light Type

    • Fluorescent
    • Incandescent
    • HID
    • LED
    • Other Light Types

    By Certifications

    • IEC
    • ATEX
    • NEC/CEC
    • Other Certifications

    By American standard

    • Class
    • Division

    By Zone

    • 0
    • 1
    • 2

    By End-User Industry

    • Power Plants
    • Military Bases
    • Pump Stations
    • Oil Fields
    • Substations
    • Oil Platforms
    • Marine/Ship Yard
    • Airports
    • Gas Stations
    • Other End-User Industries

    By Geography

    • North America
      • The U.S.
      • Canada
      • Mexico
    • Europe
      • UK
      • France
      • Germany
      • Italy
      • Spain
      • Rest of Europe
    • Asia-Pacific
      • China
      • Japan
      • India
      • Korea
      • Rest of APAC
    • South America
      • Brazil
      • Rest of South America
    • Rest of the World
      • Middle East
      • Africa
    keyboard_arrow_up
  • Table of Content

    1. Market Introduction
    1.1. Executive Summary
    1.2. Market Definition
    1.3. Market Scope

    2. Research Methodology
    2.1. Primary Research
    2.2. Research Methodology
    2.3. Assumptions & Exclusions
    2.4. Secondary data sources

    3. Explosion-Proof Lighting Market Overview
    3.1. Report Segmentation & Scope
    3.2. Key Market Trend
    3.3. Drivers
    3.3.1. Rising demand for LED�s lighting industry
    3.3.2. Several government agencies providing regulations for labors safety
    3.3.3. Increase in infrastructural developments among various end-user industries
    3.4. Restraints
    3.4.1. Lack of standardization and high import duties
    3.5. Opportunity
    3.5.1. Stringent government guidelines concerning the implementation of Explosion-proof LED lighting in the hazardous workplace
    3.6. Porter’s Five Forces Analysis
    3.6.1. Porter’s Five Forces Analysis
    3.7. Market Share Analysis

    4. Type Overview
    4.1. Introduction
    4.1.1. Market Size & Forecast
    4.2. Spot
    4.2.1. Market Size & Forecast
    4.3. Linear
    4.3.1. Market Size & Forecast
    4.4. Small Portable Type
    4.4.1. Market Size & Forecast
    4.5. Specialty, Panel, and Miscellaneous
    4.5.1. Market Size & Forecast
    4.6. Other Types
    4.6.1. Market Size & Forecast

    5. Light Type Overview
    5.1. Introduction
    5.1.1. Market Size & Forecast
    5.2. Fluorescent
    5.2.1. Market Size & Forecast
    5.3. Incandescent
    5.3.1. Market Size & Forecast
    5.4. HID
    5.4.1. Market Size & Forecast
    5.5. LED
    5.5.1. Market Size & Forecast
    5.6. Other Light Types
    5.6.1. Market Size & Forecast

    6. Certifications Overview
    6.1. Introduction
    6.1.1. Market Size & Forecast
    6.2. IEC
    6.2.1. Market Size & Forecast
    6.3. ATEX
    6.3.1. Market Size & Forecast
    6.4. NEC/CEC
    6.4.1. Market Size & Forecast
    6.5. Other Certifications
    6.5.1. Market Size & Forecast

    7. American Standard Overview
    7.1. Introduction
    7.1.1. Market Size & Forecast
    7.2. Class
    7.2.1. Market Size & Forecast
    7.3. Division
    7.3.1. Market Size & Forecast

    8. Zone
    8.1. Introduction
    8.1.1. Market Size & Forecast
    8.2. 0
    8.2.1. Market Size & Forecast
    8.3. 1
    8.3.1. Market Size & Forecast
    8.4. 2
    8.4.1. Market Size & Forecast

    9. End-User Industry Overview
    9.1. Introduction
    9.1.1. Market Size & Forecast
    9.2. Power Plants
    9.2.1. Market Size & Forecast
    9.3. Military Bases
    9.3.1. Market Size & Forecast
    9.4. Pump Stations
    9.4.1. Market Size & Forecast
    9.5. Oil Fields
    9.5.1. Market Size & Forecast
    9.6. Substations
    9.6.1. Market Size & Forecast
    9.7. Oil Platforms
    9.7.1. Market Size & Forecast
    9.8. Marine/Ship Yard
    9.8.1. Market Size & Forecast
    9.9. Airports
    9.9.1. Market Size & Forecast
    9.10. Gas Stations
    9.10.1. Market Size & Forecast
    9.11. Other End-User Industries
    9.11.1. Market Size & Forecast

    10. Explosion-Proof Lighting Market Regional Overview
    10.1. Introduction
    10.1.1. Market Size & Forecast
    10.2. North America Explosion-Proof Lighting Market
    10.2.1. North America Market Size & Forecast, By Country
    10.2.2. North America Market Size & Forecast, By Type
    10.2.3. North America Market Size & Forecast, By Light Type
    10.2.4. North America Market Size & Forecast, By Certifications
    10.2.5. North America Market Size & Forecast, By American Standard
    10.2.6. North America Market Size & Forecast, By Zone
    10.2.7. North America Market Size & Forecast, By End-User Industry
    10.2.8. U.S.
    10.2.8.1. Market Size and Forecast
    10.2.9. Canada
    10.2.9.1. Market Size and Forecast
    10.2.10. Mexico
    10.2.10.1. Market Size and Forecast
    10.3. Europe Explosion-Proof Lighting Market
    10.3.1. Europe Market Size & Forecast, By Country
    10.3.2. Europe Market Size & Forecast, By Type
    10.3.3. Europe Market Size & Forecast, By Light Type
    10.3.4. Europe Market Size & Forecast, By Certifications
    10.3.5. Europe Market Size & Forecast, By American Standard
    10.3.6. Europe Market Size & Forecast, By Zone
    10.3.7. Europe Market Size & Forecast, By End-User Industry
    10.3.8. Germany
    10.3.8.1. Market Size and Forecast
    10.3.9. France
    10.3.9.1. Market Size and Forecast
    10.3.10. UK
    10.3.10.1. Market Size and Forecast
    10.3.11. Italy
    10.3.11.1. Market Size and Forecast
    10.3.12. Spain
    10.3.12.1. Market Size and Forecast
    10.3.13. Rest of Europe
    10.3.13.1. Market Size and Forecast
    10.4. Asia-Pacific Explosion-Proof Lighting Market
    10.4.1. Asia-Pacific Market Size & Forecast, By Country
    10.4.2. Asia-Pacific Market Size & Forecast, By Type
    10.4.3. Asia-Pacific Market Size & Forecast, By Light Type
    10.4.4. Asia-Pacific Market Size & Forecast, By Certifications
    10.4.5. Asia-Pacific Market Size & Forecast, By American Standard
    10.4.6. Asia-Pacific Market Size & Forecast, By Zone
    10.4.7. Asia-Pacific Market Size & Forecast, By End-User Industry
    10.4.8. Japan
    10.4.8.1. Market Size and Forecast
    10.4.9. China
    10.4.9.1. Market Size and Forecast
    10.4.10. Australia
    10.4.10.1. Market Size and Forecast
    10.4.11. India
    10.4.11.1. Market Size and Forecast
    10.4.12. South Korea
    10.4.12.1. Market Size and Forecast
    10.4.13. Rest of Asia-Pacific
    10.4.13.1. Market Size and Forecast
    10.5. South America Explosion-Proof Lighting Market
    10.5.1. South America Market Size & Forecast, By Country
    10.5.2. South America Market Size & Forecast, By Type
    10.5.3. South America Market Size & Forecast, By Light Type
    10.5.4. South America Market Size & Forecast, By Certifications
    10.5.5. South America Market Size & Forecast, By American Standard
    10.5.6. South America Market Size & Forecast, By Zone
    10.5.7. South America Market Size & Forecast, By End-User Industry
    10.5.8. Brazil
    10.5.8.1. Market Size and Forecast
    10.5.9. Argentina
    10.5.9.1. Market Size and Forecast
    10.5.10. Rest of South America
    10.5.10.1. Market Size and Forecast
    10.6. Middle East & Africa Explosion-Proof Lighting Market
    10.6.1. Middle East & Africa Market Size & Forecast, By Country
    10.6.2. Middle East & Africa Market Size & Forecast, By Type
    10.6.3. Middle East & Africa Market Size & Forecast, By Light Type
    10.6.4. Middle East & Africa Market Size & Forecast, By Certifications
    10.6.5. Middle East & Africa Market Size & Forecast, By American Standard
    10.6.6. Middle East & Africa Market Size & Forecast, By Zone
    10.6.7. Middle East & Africa Market Size & Forecast, By End-User Industry
    10.6.8. GCC Countries
    10.6.8.1. Market Size and Forecast
    10.6.9. Egypt
    10.6.9.1. Market Size and Forecast
    10.6.10. South Africa
    10.6.10.1. Market Size and Forecast
    10.6.11. Rest of Middle East & Africa
    10.6.11.1. Market Size and Forecast

    11. Company Profile
    11.1. Philips Lighting Holding
    11.1.1. Company Basic Information, Manufacturing Base, Sales Area and Its Competitors
    11.1.2. Philips Lighting Holding Product Category, Application, and Specification
    11.1.3. Philips Lighting Holding Financial Performance (2016-2018)
    11.1.4. Main Business/Business Overview
    11.2. GE Lighting
    11.3. Hatch Transformers
    11.4. Heraeus Holding
    11.5. Chalet Lighting UK
    11.6. Osram Sylvania
    11.7. R. Stahl
    11.8. Victor Lighting
    11.9. WorkSIte Lighting

    keyboard_arrow_up
  • Explosion Proof Lighting Market Key Players

    • Philips Lighting Holding
    • GE Lighting
    • Hatch Transformers
    • Heraeus Holding
    • Chalet Lighting UK
    • Osram Sylvania
    • Stahl
    • Victor Lighting
    • WorkSIte Lighting
    keyboard_arrow_up


    • Keep your personal detail safe with us. Privacy Policy
      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

What Report Provides

  • Full in-depth analysis of the parent market
  • Important changes in market dynamics
  • Segmentation details of the market
  • Former, on-going, and projected market analysis in terms of volume and value
  • Assessment of niche industry developments
  • Market share analysis
  • Key strategies of major players
  • Emerging segments and regional markets
  • Testimonials to companies in order to fortify their foothold in the market

CLIENTS